Description: 8 Ohm Bass Reflex Speaker

Comments: Railmaster Speaker Dimensions 18x53x14.3mm

Description: AC/DC 1 Amp Reverse Unit for SW-9

Comments: Reverse unit with 8 pin plug removed from SW-9. Thirty day Sidetracks guarantee covers any defects in workmanship.

Description: NMRA DCC 12 Socket Harness Set

Comments: Expanded NMRA DCC 12 Socket Harness Set & DC Shorting Plug with 3 Golden White LED and Speaker Leads. Thirty day Sidetracks guarantee covers any defects in workmanship.

Description: Speaker 40 mm for F-7

Comments: 40 mm 8 ohm 1 watt speaker used in SHS F-7 Units

Description: Shorting Plug for SW-9 ( DC No Sound with Cab Light Pin)

Comments: This plug has 10 pins and includes the cab light pin. Thirty day Sidetracks guarantee covers any defects in workmanship.

Description: Shorting Plug for SW-9 ( DC No Sound with No Cab Light Pin)

Comments: This plug has 9 pins and does not have a pin for the cab light. It will work if you wish to operate with the cab light off. Thirty day Sidetracks guarantee covers any defects in workmanship

Description: Tsunami Model TSU-1000 Medium SteamDigital Sound Decoder

Description: Tsunami EMD 567 Model TSU-1000 Digital Sound Decoder

Description: Type LW Trainmaster Transformer

Comments: The transformer is a Type LW "Multi-Control" transformer with built-in whistle controller. It is rated at 125 Watts and operates on 115 Volts 60 Cycles. It comes wth a copy of the instructions (one line at the bottom of the first instruction page did not copy). The power cord has been replaced.



The transformer appears to be in excellent to like new condition.

Description: Model 1227 0-30 DC Volt Meter

Comments: A 2.25 inch round cutout is required for this vintage meter. The catalog number is 09590. The nuts and washers supplied by the manufacturer for installation are included. The meter is used, but cosmetically the meter looks like new. A Sidetracks 30 day warranty covering defects in workmanship and meter function will apply.

Description: Model 1257 0-25 AC Volts Wide-Vue Meter

Comments: A 2 1/8 inch round cutout is required for this vintage meter. The meter is new old stock and in the original box with a mounting bracket and instruction sheet.

Description: 0-15 DC Amps Meter Type RF2C

Comments: A 2.25 inch round cutout is required for this vintage meter. The catalog number is 2203A. The meter is new old stock and in the original box.

Description: 0-20 DC Volts Meter Type RF2C

Comments: A 2.25 inch round cutout is required for this vintage meter. The catalog number is 2237B. The meter is new old stock and in the original box. There is a small chip in the black paint on the left side of the meter immediately below the glass.

Description: Model 2122 0-10 DC Amps Meter

Comments: The catalog number is 17405. The meter is new old stock (NOS) and looks to be in new condition with the original box. The installation nuts and washers supplied by the manufacturer are included. A Sidetracks 30 day warranty covering defects in workmanship and meter function will apply.